High Pressure Unit

Control box
- Main switch
- Motor protection relays
- Motor protection switch with short-circuit instantaneous trip
- Operating hours counter
- Off relay, adjustable
- Warning light
- CEE plug 16 A / 5-pole incl . 3 m cable
Unloader
Relief valve
High pressure pump
- Pump head corrosion-resistant brass (300, 310, 340, 350 chrome plated)
- Plunger solid ceramic
- Stainless steel valves, seats and springs
- Specially formulated seals
- Integrated leakage refeed
- Low noise operation
- Cast aluminium crankcase
- Forged chrome-moly crankshaft
- Easy maintenance design
Unit for the commercial use
This unit was designed especially for the commercial and industrial use. The unit find its application preferably in car wash installations for vehicle precleaning. The High Pressure aggregate in its compact design is space-saving and with the integrated electrical control box ready for immediate installation.
Specifications
Model | Flow [l/min] |
Pressure [bar] |
RPM | Max. water Temperature |
Motor power |
300 | 10 | 150 | 1420 | 70 | 4 |
310 | 15 | 150 | 950 | 70 | 4 |
340 | 13 | 150 | 1420 | 70 | 4 |
350 | 15 | 150 | 1420 | 70 | 4 |
5CP3120 | 15 | 200 | 1420 | 70 | 5,5 |
5CP5120 | 19 | 150 | 1420 | 70 | 5,5 |
5CP6120 | 23 | 110 | 1420 | 70 | 5,5 |
5CP6190 | 31 | 90 | 1450 | 70 | 5,5 |
5CP6190 | 21 | 100 | 970 | 70 | 4 |
5CP4120 | 14 | 200 | 1450 | 70 | 5,5 |
5CP5140 | 20 | 140 | 1450 | 70 | 5,5 |
5CP6170 | 27 | 100 | 970 | 70 | 5,5 |

High Pressure Pump
- Pump head corrosion-resistant brass (300, 310, 340, 350 chrome plated)
- Plunger solid ceramic
- Stainless steel valves, seats and springs
- Specially formulated seals
- Integrated leakage refeed
- Low noise operation
- Cast aluminium crankcase
- Forged chrome-moly crankshaft
- Easy maintenance design

Equipment
- Three-phase standard motor
- Regulating unloader
- Pressure gauge
- Flow switch (for dry run protection)
- Motor protection switch
- Operating hours counter
- Base plate
- 3 m cable with 16 Ampere CEE norm connector
- Control box suitable for wall mounting
Description
With a decrease of pressure (trigger of gun is pulled) the unit will switch on automatically. If the gun is being shut off the pump unit will turn off time delayed after 3-30 seconds (adjustable) and will be on standby. The unit restarts immediately after the trigger of the gun is pulled again. In case of interruption of the water supply the unit does not start to prevent a dry run of the pump (does not apply for units with the “without primary pressure” option).
Options
- Operation without inlet pressure
- Metering pump