High Pressure Piston Pump · Frame size 60 PFR 6040
This triplex (three piston rods) positive displacement, reciprocating piston pump is constructed with chrome-plated brass manifolds, 304 stainless steel valve assemblies, and chrome-plated 304 stainless steel sleeves and cylinders. Pumps come standard with NBR (Buna-N) piston cups, seals and O-rings.
The lower RPM belt drive design provides strong inlet suction and long-lasting pump and seal life.
Technical specifications
| Flow rate | 151 l/min |
|---|---|
| Operating pressure | 105 bar |
| Speed | 500 min⁻¹ |
| Inlet port | 2" NPT |
| Discharge port | 1 1/4" NPT |
| Shaft diameter | 45 mm |
| Material | Brass |
Downloads
- Data sheet German · PDF
- Data sheet English · PDF
- Service manual English · PDF
- Operating manual German / English · PDF
CAD files
- STEP – 6020 (catpumps.com)
- IGES – 6020 (catpumps.com)
- DXF – 6020 (catpumps.com)
- DWG – 6020 (catpumps.com)
For the 6040 the manufacturer provides the CAD files of model 6020.
6040: drive, frame size and accessories
- Drive
- At its rated point – 151 l/min at 105 bar – the 6040 needs about 33 kW of drive power by the rule of thumb pressure × flow / 480; the next standard motor size above is 37 kW. More under Sizing and drive.
- Frame size
- Frame size 60 PFR comprises 4 models covering 151–227 l/min and 70–105 bar. For more flow see the 6020 (227 l/min at 70 bar); none reaches a higher pressure.
- Material
- The 6040 belongs to the brass group. The same ratings (flow, pressure, speed) are also available in other materials: 6041 (stainless steel).
- Accessories
- Our catalogue has 5 pressure regulators, 3 unloader valves and 6 pressure relief valves that suit 151 l/min and 105 bar. The lists are filtered to this operating point.
Spare parts
Click an item in the drawing or in the parts list to add it to your request list. We turn it into a quotation – no order is placed.
On the request list: 0 · for this pump: 0 Open request list →
One kit bundles wearing parts of this pump ↓
Parts list
| Item | Part no. | Description | Qty | Add to request list |
|---|---|---|---|---|
| 2 | 43048 | Key (M14 x 9 x 90) 1 | 1 | |
| 5 | 126532 | Screw, HH (M10x40) | 8 | |
| 6 | 126231 | Lockwasher (M10) | 8 | |
| 7 | 126574 | Washer, Flat (M10) | 8 | |
| 8 | 29443 | Cover, Bearing, Outer | 2 | |
| 10 | 29444 | O-Ring, Bearing Cover - 70D | 2 | |
| 11 | 11443 | Seal, Oil, Crankshaft - 70D | 2 | |
| 15 | 29441 | Bearing, Roller | 2 | |
| 16 | 29442 | Cover, Bearing, Inner | 2 | |
| 17 | 29444 | O-Ring, Bearing Cover - 70D | 2 | |
| 20 | 126612 | Assembly, Connecting Rod (Includes: 21, 22) | 3 | |
| 21 | 126560 | Washer, Locking | 3 | |
| 22 | 126593 | Washer, Flat (M10.5) | 6 | |
| 25 | 29440 | Crankshaft, Dual End (M65.5) | 1 | |
| 31 | 828710 | Protector, Oil Cap with Foam Gasket 1 | 1 | |
| 32 | 43211 | Cap, Oil Filler | 1 | |
| 33 | 14177 | O-Ring, Oil Filler Cap - 70D | 1 | |
| 34 | 126743 | Bolt, Eye (M12x1.75) (For Lifting Pump Only) | 1 | |
| 38 | 11338 | O-Ring, Valve Seat - 70D | 1 | |
| 39 | 44428 | Gasket, Flat, Oil Gauge - 80D | 1 | |
| 40 | 126531 | Screw, HH (M10x30) | 8 | |
| 41 | 126231 | Lockwasher (M10) | 8 | |
| 42 | 126574 | Washer, Flat (M10) | 8 | |
| 48 | 25625 | Plug, Drain (1/4" x 19 BSP[M]) | 1 | |
| 49 | 23170 | O-Ring, Drain Plug - 70D | 1 | |
| 50 | 29438 | Cover, Rear | 1 | |
| 51 | 129386 | Gasket, Rear Cover | 1 | |
| 53 | 45303 | Crankcase w/Guide Pins (Inclds: 34, 54) | 1 | |
| 55 | 126554 | Stud (M16x72) | 4 | |
| 64 | 29481 | Pin, Crosshead | 3 | |
| 65 | 43809 | Rod, Piston | 3 | |
| 69 | 126588 | Washer, Oil Seal | 3 | |
| 70 | 29454 | Seal, Oil, Crankcase - 80D | 3 | |
| 75 | 29340 | Slinger, Barrier | 3 | |
| 77 | 13967 | O-Ring, Sleeve | 6 | |
| 80 | 43129 | Sleeve (M25) | 3 | |
| 81 | 29455 | Back-up-Ring, Sleeve | 3 | |
| 100 | 29456 | Retainer, Seal | 3 | |
| 101 | 43136 | Wick, Oil (M25) | 3 | |
| 106 | 43130 | Seal, LPS Ungreased (M25) | 3 | |
| 110 | 43283 | Manifold, Inlet | 1 | |
| 117 | 88902 | Stud (M16 x 277) For Removal of DM and IM) (Not Shown) 2 | 4 | |
| 119 | 29460 | Valve, Inlet | 3 | |
| 119 | 43200 | Valve, Inlet | 3 | |
| 133 | 29461 | Cup-Piston Assy w/S-Piston | 3 | |
| 133 | 43201 | Cup-Piston Assy w/S-Piston | 3 | |
| 135 | 29463 | Spacer, Piston | 3 | |
| 136 | 29464 | Retainer, Piston | 3 | |
| 136 | 43203 | Retainer, Piston | 3 | |
| 137 | 44272 | Washer, Conical (M14) | 3 | |
| 138 | 29465 | Nut, Slotted (M14) | 3 | |
| 139 | 29354 | Cotterpin (M2.5x25) | 3 | |
| 143 | 12392 | O-Ring, Inlet Spacer - 70D | 6 | |
| 150 | 29466 | Cylinder | 3 | |
| 150 | 43204 | Cylinder | 3 | |
| 153 | 23116 | Back-up-Ring, Cylinder | 3 | |
| 162 | 43206 | Back-up-Ring, Seat | 3 | |
| 163 | 29471 | O-Ring, Seat | 3 | |
| 164 | 43205 | Seat (Flat Valve) | 3 | |
| 166 | 29468 | Valve (Flat Valve) | 3 | |
| 167 | 29469 | Spring | 3 | |
| 168 | 43143 | Retainer, Spring | 3 | |
| 185 | 29472 | Manifold, Discharge | 1 | |
| 186 | 126569 | Lockwasher (M16) | 12 | |
| 187 | 29473 | Bolt (M16x225) | 4 | |
| 194 | 88853 | Nut, Hex (M16) | 8 | |
| 196 | 29476 | Plug (1-1/4" NPT) | 1 | |
| 197 | 22187 | Plug, Discharge (3/8" NPT[M]) (Not Shown) | 1 | |
| 250 | 29445 | Protector, Shaft (Included w/pump) | 1 | |
| 255 | 33243 | Mount, Direct | 1 | |
| 260 | 126604 | Rail, Box (Included with Pump) | 1 | |
| 279 | 30429 | Oiler (10 oz) (Not Shown) | 3 | |
| 281 | 30969 | 0 oz.) | 3 | |
| 283 | 34334 | Kit, Oil Drain (3/8" x 24") (Not Shown) 1 | 1 | |
| 300 | 30440 | : 133,139,143) | 1 | |
| 302 | 30439 | lds: 119,133,135,136,137,138,139,143) | 1 | |
| 305 | 30485 | al (Inclds: 75,77,80,81,101,106,139) | 1 | |
| 306 | 30484 | s: 101,106,139) | 1 | |
| 310 | 30441 | ds: 143,162,163,164,166,167,168) | 1 | |
| – | 6138 | Oil, Crankcase, Can 5l | 2 |
in the request list covered by a requested kit
Seal and valve kits
A kit bundles the wearing parts of one assembly. Selecting it highlights the items it covers in the drawing and the parts list – once requested, they stay marked.
Cup kits
-
Cup kit
30433
NBRMedium Nitrile (Buna-N)
contains 3 items · one kit per pump
Parts list
- 133 43201 Kolbenmanschette, NBR 3×
- 139 29354 Splint 3×
- 143 12392 O-Ring, Zylinder, NBR 6×